2008 Recap

Here is a quick recap of 2008 up until about the end of summer.

Here I've added the railing, netting, and skid beams (for supporting the ship's boats) to the quarter deck.

Here is a nice view of the quarter deck in general. I have placed the main mast in this photo.

This photo shows the addition of the chainplate and deadeye assemblies. This is where the shrouds (the rope-ladder looking rigging) are eventually fastened.

Here is a picture of the overall ship. It is tough to fit the whole thing in one detailed photo becuase it is pretty large (about 40-some inches long). I am ready to start the rigging and I promise to provide much more detail in my subsequent posts now that I am all caught up.

2007 Recap

Here is a quick recap of 2007.

I've have started fitting out the deck extensively. Here is a photo of the railing, belfry, and hatches on the quarterdeck.

The signal flag lockers was an addition I made to the kit using leftover material from the hatch gratings. I was quite happy with the way they turned out.

Here is a good view of the upper gun deck from above. I added all of the rigging to the cannons, and painted small steal ball bearings black to fill out the shot garland (this is where the cannon balls were stowed for easy access). The rigging really finished off the look of the guns.

In this photo, I have added the figurehead to the stem, as well as a additional bow detail.

2006 Recap

2006 allowed me time to get my workshop set up at the new house so I was able to accomplish a but more that year.

Quite a bit of work was done on the bow.


Here, the stern gallery has been completed. I added window paning throughout the stern. The original kit called for blue plastic with pencil drawn lines for the panes in the windows. Not very realistic to say the least.


Here is a decent view of the rudder along with the stern.

2005 Recap

Here are some construction photos from 2005. This was a busy year being that we moved and all so it didn't permit for a lot of build time.

View of bow and stem.

View of gunports and wales.

View of bow and stem.

Here the quarter galleries are finished. I added paning to the windows beyond what the kit provided to achieve more realism.

2004 Recap

This post provides a recap of my HMS Victory model building activity in 2004. This model is built from Constructo's 1:94 scale HMS Victory kit. The kit was purchased (in Spain) as a gift by my Dad during his trip to Europe in Winter 2004. Wherever possible, I am attempting to make the model a bit more reflective of the real ship. Although I am not a purist with regard to scale, I do try to make things look good on the model. Luckily, there are plenty of resources available for the HMS Victory as it still exists today.

Here you can see that we pretty much start out with a basic frame upon which the planks will eventually be fastened.

Here is an example of one of my additions to the kit. The window detailing added to the exterior of the coach house to provide a more accurate representation of the real ship.

In order to make life easier later on with regard to planking, basswood blocks were added in between the frames to provide a good base for the planks.

Here you can see how the filler blocks were then sanded to the contour of the hull providing an excellent base for the planks. This especially helps planking around the curves of the bow and stern.

The first few rows of planking are added here.

More planking...one of the most difficult areas is the curvature of the bow. Here, each plank has to be tapered in order to match the curve of the bow.

Here the planking has been completed and the hull sanded and filled.

This shows a nicer view of the completely sanded hull.

Following completion of the planking, holes for the gunports (there are over 100 on the Victory) are marked and cut into the hull.

Each of the gunport holes are then framed in.

Here we have the completed gunports all framed in.

The quarter galleries were the next step. Here, I made another modification by creating darkened windows rather than the blue coloration provided with the kit (which in my opinion looks very unrealistic). Thin veneer planking was used to give the quarter galleries a nice finish.

Here I begin work on the stern gallery, again using darkened windows.

Here the stern gallery is finished with Sapelly veneer.

Now, the stem has been notched into the bow.

Here, the lower, middle, and upper wales have been added to the hull.